DC 5V 80A 400W Switch Mode Power Supply

Short Description:

Huyssen Power’s Switching power supplies Input Voltages is from 90-264VAC, 50-60Hz, with some models offering an optional industrial grade 277VAC, output power range from 5W to 2,000W. Output Voltages offered between 3 to 600VDC or more.

In addition to our wide range of standard products, we also provide customized power supply services, please contact us directly!

Send email to us Download as PDF

Product Detail

Product Tags

Video

Specifications:

MODEL		HSJ-400-5
OUTPUT	DC VOLTAGE	5V
	RATED CURRENT	80A
	CURRENT RANGE	0 ~ 80A
	RATED POWER	400W
	RIPPLE & NOISE (max.) Note.2	100mVp-p
	VOLTAGE ADJ. RANGE	4.5 ~ 5.5V
	VOLTAGE TOLERANCE Note.3	±3.0%
	LINE REGULATION	±0.5%
	LOAD REGULATION	±2.0%
	SETUP, RISE TIME	2500ms, 50ms/230VAC
	HOLD UP TIME (Typ.)	20ms/230VAC
INPUT	VOLTAGE RANGE	180 ~ 264VAC 254 ~ 370VDC
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY (Typ.)	79%
	AC CURRENT (Typ.)	5A/230VAC
	INRUSH CURRENT(Typ.)	100A/230VAC
	LEAKAGE CURRENT	<1mA / 240VAC
PROTECTION	OVER LOAD	105 ~ 140% rated output power
	OVER LOAD	Protection type : Hiccup mode, recovers automatically after fault condition is removed
	OVER VOLTAGE	115 ~ 150%
	OVER VOLTAGE	Protection type :Hiccup mode, recovers automatically after fault condition is removed
	OVER TEMPERATURE	Shut down O/P voltage, recovers automatically after temperature goes down
ENVIRONMENT	WORKING TEMP.	-20 ~ +60°C (Refer to derating curve)
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-20 ~ +85°C , 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/°C (0~50°C)
	VIBRATION	10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY	SAFETY STANDARDS	U60950-1 approved
	WITHSTAND VOLTAGE Note 6	I/P-O/P:3.0KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH
OTHERS	MTBF	235K hrs min. MIL-HDBK-217F (25°C )
	DIMENSION	21511530mm (LWH)
	PACKING	0.85Kg;15pcs/14Kg/0.79CUFT
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation.