DC 5 Volt 30A 150W Thin Power Supply LRS-150-5

Short Description:

Huyssen Power’s Switching power supplies Input Voltages is from 90-264VAC, 50-60Hz, with some models offering an optional industrial grade 277VAC, output power range from 5W to 2,000W. Output Voltages offered between 3 to 500VDC or more.

In addition to our wide range of standard products, we also provide customized power supply services, please contact us directly!

Send email to us Download as PDF

Product Detail

Product Tags

Features:

Huyssen Power Supply 12V12.5A
AC input 110/220VAC
Low leakage current <2mA
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by air
Withstand 300vac surge input for 5 second
Conformal coated
LED indicator for power on
Low cost, high reliability
100% full load burn-in test
2 years warranty

Specifications:

Model		LRS-150-5	LRS-150-12	LRS-150-15	LRS-150-24	LRS-150-36	LRS-150-48
output	DC voltage	5V	12V	15V	24V	36V	48V
	Rated current	20A	12.5A	10A	6.5A	4.3A	3.3A
	Current range	0~20A	0~12.5A	0~10A	0~6.5A	0~4.3A	0~3.3A
	Rated power	120W	150W	150W	156W	154.8W	158.4W
	Ripple&noise	120mVp-p	150mVp-p	150mVp-p	200mVp-p	200mVp-p	200mVp-p
	DC voltage ADJ. range	±10%	±10%	±10%	±10%	±10%	±10%
	Voltage tolerance Note.3	±3%	±2%	±1%	±1%	±1%	±1%
	Line regulation Note.4	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
	Load regulation Note.5	±2%	±1%	±0.5%	±0.5%	±0.5%	±0.5%
	Setup,rise,hold up time	800ms,30ms,40ms/230VAC(full load)
input	Voltage range	90~132VAC/170~264VAC(selected by switch),240~373VDC
	Frequency range	47~63HZ
	AC current	2.8A/115VAC 1.6A/230VAC
	Inrush current	Cold start 50A/230VAC
	Efficiency	80%	83%	85%	86%	88%	90%
	Leakage current	<0.75mA/240VAC
protection	overload	Rated output power110%~150% start over load protection
	overload	protection type:hiccup mode,auto-recovery after fault condition is removed
	Over voltage	Rated output voltage 115%~135% Start over voltage protection
	Over voltage	Protection type:hiccup mode,auto-recovery after fault condition is removed
	Over temperature	100℃±10℃(RT1 detect beside transformer)
	Over temperature	Protection type:cut off the output,auto-recovery after the temperature become normal
environment	Working temp,humidity	-30℃~+70℃(Please refer to“derating curve”) 20%~90%RH Non-condensing
	Storage temp,humidity	-40℃~+85℃,10%~95%RH non-condensing
	Withstand vibration	10~500HZ,2G 10min/1cycle,period for 60 minutes,each axes
safety	Withstand voltage	I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC
safety	Isolation resistance	I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC
Fit standard	Safety standards	Compliance to UL60950-1,TUV EN60950-1,GB4943
	EMC emission	Compliance to EN55022(CISPR22)Class A,GB9254 Class B,EN55014,EN61000-3-2,3
	EMC immunity	Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024,EN61000-6-1
others	Dimension	1599730mm(LWH)
	Weight/packing	0.43kg/30pcs/13.9kg/0.023m³/0.82CUFT
	MTBF	≥580K hrs min. MIL-HDBK-217F(25℃)
note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4.Line regulation is measured from low line to high line at rated load. 5.Load regulation is measured from 0% to 100% rated load 6.The ambient temperature derating of 5℃/1000 m is needed for operating altitude greater than 2000m(6500ft) 7.The power supply is considered as a component which will be installed into a finalequipment.The final equipment must be re-confirmed that it still meets EMC directives.For guidance on how to perform these EMC tests.

Related products:

Applications:

Widely used in : Billboards, LED Lighting ,Display screen, 3D Printer, CCTV camera, Laptop, Audio ,Telecommunication ,STB , Intelligent robot, Industrial control, equipment, etc.