DC Full Adjustable 0-24V30A 720W Switching Power Supply

Short Description:

Huyssen Power’s Full Adjustable Switching power supplies Input Voltages is from 90-264VAC, 50-60Hz, with some models offering an optional industrial grade 277VAC, output power range from 100W to 2,000W. Output Voltages offered between 0~3V to 0~600VDC or higher.

In addition to our wide range of standard products, we also provide customized power supply services, please contact us directly!

Send email to us Download as PDF

Product Detail

Product Tags

Specifications:

MODEL		HSJ-720-24
OUTPUT	DC VOLTAGE	0-24V
	RATED CURRENT	30A
	CURRENT RANGE	0 ~ 30A
	RATED POWER	720W
	RIPPLE & NOISE (max.) Note.2	240mVp-p
	VOLTAGE ADJ. RANGE	0-24V
	VOLTAGE TOLERANCE Note.3	±3.0%
	LINE REGULATION	±0.5%
	LOAD REGULATION	±2.0%
	SETUP, RISE TIME	2500ms, 50ms/230VAC
	HOLD UP TIME (Typ.)	20ms/230VAC
INPUT	VOLTAGE RANGE	90 ~ 132VAC / 176 ~ 264VDC
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY (Typ.)	87%
	AC CURRENT (Typ.)	1.2A/230VAC 0.6A/230VAC
	INRUSH CURRENT(Typ.)	60A/230VAC
	LEAKAGE CURRENT	<2mA / 240VAC
PROTECTION	OVER LOAD	105 ~ 140% rated output power
	OVER LOAD	Protection type : Hiccup mode, recovers automatically after fault condition is removed
	OVER VOLTAGE	28~ 29V
	OVER VOLTAGE	Protection type :Hiccup mode, recovers automatically after fault condition is removed
	OVER TEMPERATURE	Shut down O/P voltage, recovers automatically after temperature goes down
ENVIRONMENT	WORKING TEMP.	-20 ~ +60°C (Refer to derating curve)
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-20 ~ +85°C , 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/°C (0~50°C)
	VIBRATION	10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY	SAFETY STANDARDS	U60950-1 approved
	WITHSTAND VOLTAGE Note 6	I/P-O/P:3.0KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH
OTHERS	MTBF	235K hrs min. MIL-HDBK-217F (25°C )
	DIMENSION	24512565mm (LWH)
	PACKING	1.3Kg; 10pcs/14Kg
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation.

Applications:

Widely used in : Billboards, LED Lighting ,Display screen, 3D Printer, CCTV camera, Laptop, Audio ,Telecommunication ,STB , Intelligent robot, Industrial control, equipment, Motor, etc.