SC-180 12V 15A 180W Switching power supply with UPS function Battery charging

Short Description:

Uninterruptible power supplies :

Can work without battery as power supply,

Full charge automatically stop, prevent battery overcharge,

Mains / battery powered automatically switches Single output,

with self-resetting fuse Automatically switch to battery power supply,

With UPS function for battery charge,

With short circuit, overcurrent, overvoltage protection.

Send email to us Download as PDF

Product Detail

Product Tags

Features:

·Universal AC input: 110/220V

·Small volume，low weight，high efficiency

·Protections:short circuit/over load

·Indicator for power on/charge/normal(LED)

·100% full load burn-in test

·Battery protection at low voltage

·2 years’ warranty

Specifications:

Model		SC-180-12		SC-180-24
output	DC voltage	CH1:13.8V	CH1:13.4V	CH1:27.6V	CH2:26.5V
	Voltage tolerance	±1%	-----	±1%	-----
	Rated current	13.5A	1.5A	6.5A	1A
	Current range	0~15A	-----	0~7.5A	-----
	Rated power	180W		180W
	Ripple&noise	100mvp-p	-----	100mvp-p	-----
	DCvoltage ADJ.range	CH1:11.3~14.9V		CH1:21.3~29.8V
Input	Voltage range	90~132V / 180~264VAC，127~370VDC
	frequency	47~63HZ
	AC current	4A/115VAC，2.5A/230VAC
	efficiency	81%		83%
	Inrush current	Cold start current 30A/115VAC，50A/230VAC
	Leakage current	< 1mA/240VAC
Protection	Over load	Rated output power110%~150% start over load protection
		protection mode: AC charging mode:hiccup mode auto-recovery after fault condition is removed
	Battery protectionAt low voltage	9.5~11V		20~22V
		protection mode:cutoff output
Function	UPS introduction	Long-term online floating charge to battery,high charging efficiency,battery can saturate to more than 90% ,cauto-stop harging when it's full,prevent over charging. Effectively extend battery life,AC/battery auto switch,no switch time,no need human guard,cold-start ,when there is no AC input ,can use battery start UPS,Meet the user's emergency needs
Environment	Working temp,humidity	-10℃~+60℃，20%~90%RH
	Storage temp,humidity	-20℃~+85℃，10%~95%RH non-condensing
	Withstand vibration	10~500HZ，2G10min/1cycle，period for 60 minutes，each axes
safety	Withstand voltage	I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	Isolated resistance	I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC
Standard	Safety standard	Compliance to UL60950-1
	EMC standard	Compliance to EN55022，CLASSB
Others	Dimension	1299838mm(LWH)
	Weight/packing	0.65kg/36pcs
Note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25℃of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance : includes set up tolerance, line regulation and load regulation.